Free Cut List Optimizer for Plywood & Sheet Goods
Create a woodworking cut list and arrange your parts for cutting with Cut List Maker. Use the plywood cut calculator to plan sheet layouts, account for saw blade kerf, and control grain direction. Enter your dimensions in inches or millimeters, then generate a cutting layout for your project.
How to Generate a Cut List
Three steps in the editor above:
- Add your available material and sheet sizes in the Materials table.
- Enter the dimensions and quantities of your parts in the Parts table.
- Click Make Cuts to generate and review your cutting layout.
Plywood Cut Calculator
Cut List Maker arranges your parts on the sheet sizes you provide, spacing them by the kerf value you set and respecting grain direction when enabled. The layout helps you see how parts fit and how much sheet material you need. Results are a practical starting point for cutting, not a mathematically guaranteed minimum-waste solution.
Cut List Optimizer for Woodworking Projects
Use Cut List Maker for cabinets, closets, shelving, tables, and other woodworking projects. The optimizer works with rectangular sheet goods like plywood, MDF, and particle board. Enter parts as length and width, choose your cutting method, and review the layout sheet by sheet.
Design in Build Studio, Then Plan Your Cuts
Build a simple 3D woodworking project in Build Studio and send its parts to Cut List Maker for cutting layouts. The panel dimensions transfer directly, so you can start planning cuts without re-entering measurements.
Frequently Asked Questions
Is Cut List Maker free?
Yes. You can create cut lists without signing up. Guests can generate up to 3 cut layouts per day. A free account raises that to 7 per day with 1 saved project. Pro plans start at $10 per month for unlimited cuts, 30 projects, and premium materials, or try a 3-day pass for $5.
How do I create a cut list?
Add your sheet sizes in the Materials table, enter each part's dimensions and quantity in the Parts table, then click Make Cuts. The optimizer arranges your parts on the available sheets and shows a cutting layout you can review, zoom, and export.
Can I calculate plywood cutting layouts?
Yes. Enter your plywood sheet dimensions and the parts you need, set the kerf for your blade, and the optimizer arranges the parts across your sheets. You can enable grain direction so parts stay oriented correctly for plywood with a visible grain.
Does Cut List Maker support inches and millimeters?
Yes. Switch between inches and millimeters at any time using the units control in the Options section. All dimensions, kerf values, and sheet sizes update accordingly.
Can I bring a project from Build Studio into Cut List Maker?
Yes. In Build Studio, design your 3D project and use the transfer option to send its panel dimensions to Cut List Maker. The parts arrive in the Parts table ready for optimization, no manual re-entry needed.
